Many years of investment has gone into providing the UK with the most durable, efficient and aesthetically pleasing trench heating products designs available.
Technically superior in design and construction the AEL range of trench heaters provide subtle heating with noticeable energy-saving whilst conforming to all British Standards and European EN 16430 Standards.
For any enquires please provide the following information as shown in product section below with any additional information that you may have that would help us such as “ Any corners required” etc.
- Type of Grille 2. Colour 3. Reference Code 4. Length 5. Width 6. Height
Double T-Bar Roll-up grille
Standard: Spacing between the vanes 13mm. Spacing made of black PCV.
Option:PCV Spacing available in the following colours:
- grey,
- beige,
- light brown,
- dark brown.
The maximum length of a single piece of grille is 6000mm.
The grille type must be specified separately from the trench casing when making enquiries or placing orders.
| Type of grille | Colour | AEL Grille Reference Code |
| Double T-Bar Roll-up grille (natural aluminium) | Natural aluminium | ZDW-1,8/B/L |
| Double T-Bar Roll-up grille (anodized aluminium) | Satin | ZADWS-1,8/B/L |
| Anodized steel | ZADWST-1,8/B/L | |
| Anodized gold | ZADWZ-1,8/B/L | |
| Anodized black | ZADWC-1,8/B/L | |
| Anodized medium brown | ZADWSB-1,8/B/L |
B-width of the unit, L- length of the grille
Double T-Bar Roll-Up Aluminium Grilles
Top view and profile section
The grille is made of natural wood.
Standard: Spacing (sleeves) of the length 13mm between the rungs are made of black PVC.
Option: Spacing (sleeves) are also available in colours:
- grey,
- beige,
- light brown,
- dark brown.
All those spacing (sleeves) are available in the non-standard colours displayed above at a standard length of 17mm
Wooden spacing (sleeves) are also available (beech unvarnished) at a length of 17mm.
The maximum length of a single piece of grille is 6000mm.
DIFFERENT TYPES OF WOOD FINISHES
Oak
Ash
Ash
Ash
Jatoba
The grille is considered as the additional part, so, it should be considered as a separate order position.
| Type of grille | Colour AEL Grille Reference Code | Order Code |
| Roll-up wooden grille | Oak ZD-1,8/B/L | ZD-1,8/B/L |
| Ash ZJ-1,8/B/L | ZJ-1,8/B/L | |
| Beech ZB-1,8/B/L | ZB-1,8/B/L | |
| Merbau ZM-1,8/B/L | ZM-1,8/B/L | |
| Jatoba ZJB-1,8/B/L | ZJB-1,8/B/L |
B-width of the unit, L- length of the grille
Top view and profile
Roll-up grille profile closed made of aluminium.
The grille is available in the following variants:
- Natural Aluminium,
- Anodized Aluminium,
- Aluminium – Wood effect coating.
Standard: Spacing (sleeve) of the length 13mm between the rungs are made of black PVC.
Option: Spacing (sleeves) are also available in colours:
- grey,
- beige,
- light brown,
- dark brown .
All the spacing (sleeves) are available in non-standard colours displayed above but in a standard length of 17mm.
The maximum length of a single piece of grille is 6000 mm.
The grille type must be specified separately from the trench casing when making enquiries or placing orders.
Top view and profile section
Modular Aluminium grilles are only available in Natural Aluminium and Anodised Aluminium both c/w black PVC joints.
The grille type must be specified separately from the trench casing when making enquiries or placing orders.
| Type of grille | Colour AEL Grille Reference Code | Order Code |
| Modular grille – natural aluminium | Natural aluminium MPZ-1,8/B/L | MPZ-1,8/B/L |
| Modular grille – anodised aluminium | Satin MPZAS-1,8/B/L | MPZAS-1,8/B/L |
| Anodized steel MPZAST-1,8/B/L | MPZAST-1,8/B/L | |
| Anodized gold MPZAZ-1,8/B/L | MPZAZ-1,8/B/L | |
| Anodized black MPZAC-1,8/B/L | MPZAC-1,8/B/L | |
| Anodized medium brown MPZASB-1,8/B/L | MPZASB-1,8/B/L |
B-width of the unit, L- length of the grille
Aluminium Modular Grilles
Natural aluminium
Anodised aluminium, satin
Anodized steel
Anodized gold
Anodized medium brown
Anodized black
Linear Aluminium Grilles
Top view and profile section
The Linear grille has been entirely made of aluminium with a snap on profile.
The grille is available in the following variants:
- Natural aluminium (cross – bar joints are spray coated in RAL 9005 black colour),
- Any RAL colour coated aluminium (the grille is entirely covered in one colour),
- Anodised aluminium (cross bar joints are coated in RAL 9005 black colour).
The grille type must be specified separately from the trench casing when making enquiries or placing orders.
| Type of grille | Colour AEL Grille Reference Code | Order code |
| Aluminium linear grille snap on profile natural aluminium | Natural aluminium PZW-1,8/B/L | PZW-1,8/B/L |
| Aluminium linear grille snap on profile anodised aluminium | Satin PZWAS-1,8/B/L | PZWAS-1,8/B/L |
| Anodized steel PZWAST-1,8/B/L | PZWAST-1,8/B/L | |
| Anodized gold PZWAZ-1,8/B/L | PZWAZ-1,8/B/L | |
| Anodized black PZWAC-1,8/B/L | PZWAC-1,8/B/L | |
| Anodized medium brown PZWASB-1,8/B/L | PZWASB-1,8/B/L | |
| Linear bar aluminium grille, RAL colour coated aluminium | Any from RAL colours range PZWR-1,8/B/L | PZWR-1,8/B/L |
B –width of the unit, L – length of the grille
Linear Stainless Steel Grilles (High Traffic Applications)
Top view and profile section
The Linear Stainless Steel Grille is available only as a rigid version.
The maximum length of one section of the Stainless Steel Grille is 2000 mm.
Grille lengths required longer than 2000 mm are made of separate Grilles of equal lengths.
The grille type must be specified separately from the trench casing when making enquiries or placing orders.
| Type of grille | Colour AEL Grille Reference Code | Order Code |
| >Linear stainless steel grille | Stainless steel SN-1,8/B/L | SN-1,8/B/L |
B -width of the unit, L – length of the grille
AEL Trench heaters can be to include a corner option with linear grilles.
Trench heaters made including corner option together with cross-bar grilles.
Cross bar Trench heaters that specifically require a corner will require an additional casing section for the grilles to align together at a 45° angle of the corner Grille.
There is an extra cost for Linear Grille Trench heaters that require a corner option to align the grilles to 45° angles.
Please contact sales@aelheating.com for any technical advice, quotations or orders you may want to place or visit www.aelheating.com
For any enquires please provide the following information as shown in product section below with any additional information that you may have that would help us such as “ Any corners required” etc.
- Type of Grille 2. Colour 3. Reference Code 4. Length 5. Width 6. Height